Decarbonisation Ecosystem Development Programme For Non-Iron & Steel Professionals
Programme Overview
Malaysia Steel Institute (MSI) invites non-iron and steel professionals to support the industry's transition towards a competitive, low-carbon future. The programme provides essential steel-sector knowledge, introduces the Steel Industry Roadmap 2035 (SIR2035), and creates pathways for training and consulting under MSI recognition.
Who Should Join
Training Providers Trainers Consultants Verifiers Auditors
Open to professionals from non-iron and steel backgrounds.
Programme Highlights
1
Mandatory one-day Iron & Steel 101 foundation course.
2
Flexible pathways using an approved own module or MSI-developed modules.
3
Certification tracks covering ESG, carbon tax, green financing and green procurement, CBAM and EPD.
4
Progressive Levels 1–3 for fundamentals, consulting capability and train-the-trainer development.
PART I - MSI TRAINING PROGRAMMES
MSI maintains a broad training portfolio to strengthen industry knowledge, technical capability, regulatory readiness, productivity, safety, digital capability and the transition towards a more sustainable iron and steel sector.
The harmonised 2026 portfolio contains 149 programme records across 11 domains. It brings together established programmes, technical programmes, historically proven programmes and selected market-demand programmes under development, while avoiding duplicate counting of the same learning scope.
1. Training Portfolio at a Glance
| Code | Programme Domain | Programme Records |
|---|---|---|
| ESG | ESG, Sustainability & Governance | 40 |
| ENE | Environment, Energy & Carbon | 37 |
| OSH | Occupational Safety & Health | 24 |
| LDR | Leadership, Management & Soft Skills | 13 |
| DIG | Digital Skills & AI | 10 |
| TEC | Iron & Steel Technical | 10 |
| QMS | Quality Management & Productivity | 6 |
| TRD | Trade & Market Access | 3 |
| BUS | Business, Finance & Operations | 3 |
| SKL | Skills Certification & HRD | 2 |
| STD | Standards & Product Compliance | 1 |
2. Programme Status Guide
| Website Status | Meaning |
|---|---|
| Established portfolio | Programme is part of MSI's established harmonised training portfolio. Delivery is subject to scheduling, trainer and commercial arrangements. |
| Legacy - subject to review | Historically delivered programme retained for continuity and may be reactivated after content review. |
| Development pipeline | Market-demand programme identified for development or partnering; not yet presented as a fully launched MSI programme. |
| Standards series | Parent series for standards-based training modules under development. |
3. Complete MSI Training Programme Directory
The directory below lists the complete 149-item harmonised programme portfolio. Where a provider or collaborator is shown, it reflects the identified source record and may be updated for future deliveries.
ESG, Sustainability & Governance
| Programme Code | Programme Title | Level | Duration |
|---|---|---|---|
| MSI-HRD-ESG-001 | Advanced Carbon Tax Impact Analysis for Steel Producers | Advanced | |
| MSI-HRD-ESG-002 | Carbon Tax and Carbon Pricing for Malaysian Steel Companies | General/Professional | |
| MSI-HRD-ESG-003 | Carbon Tax Readiness for Steel Companies: MRV, Calculation and Costing | General/Professional | |
| MSI-HRD-ESG-004 | Climate Change Basics and Implications for Steel Businesses | Foundation/Awareness | |
| MSI-HRD-ESG-005 | Creating a Sustainability Culture | General/Professional | |
| MSI-HRD-ESG-006 | Driving Sustainable Success: ESG Governance & Transformation Change Management | General/Professional | Half Day |
| MSI-HRD-ESG-007 | ESG & Sustainability - Integrated Programme | General/Professional | |
| MSI-HRD-ESG-008 | ESG Comprehensive Training | General/Professional | |
| MSI-HRD-ESG-009 | ESG Comprehensive Training for Senior Management | General/Professional | |
| MSI-HRD-ESG-010 | ESG Digitalisation Made Easy: Compliance, Disclosures and Reporting for MSMEs | General/Professional | |
| MSI-HRD-ESG-011 | ESG Essentials and Roadmap Development | General/Professional | |
| MSI-HRD-ESG-012 | ESG General Awareness | Foundation/Awareness | |
| MSI-HRD-ESG-013 | ESG Governance, Roles and Responsibilities for Steel Organisations | General/Professional | |
| MSI-HRD-ESG-014 | ESG Rating Assessment and Verification System Certification for Companies | Certification | |
| MSI-HRD-ESG-015 | ESG Rating Assessment and Verification System Certification for Professionals | Certification | |
| MSI-HRD-ESG-016 | ESG Readiness Course for MSMEs | General/Professional | |
| MSI-HRD-ESG-017 | ESG Social & Governance | General/Professional | |
| MSI-HRD-ESG-018 | Basic Sustainability Reporting Disclosures | General/Professional | |
| MSI-HRD-ESG-019 | ESG Gamified Learning | General/Professional | |
| MSI-HRD-ESG-020 | ESG Transformation: From Compliance to Competitive Advantage | General/Professional | |
| MSI-HRD-ESG-021 | Expert Masterclass in ESG Sustainability Now and Beyond | Advanced/Masterclass | |
| MSI-HRD-ESG-022 | GHG Accounting for Steel Operations (ISO 14064 & GHG Protocol) | General/Professional | |
| MSI-HRD-ESG-023 | GRI Sustainability Reporting for Steel Manufacturing | General/Professional | |
| MSI-HRD-ESG-024 | IFRS S1 & S2: Climate and Sustainability Reporting | General/Professional | |
| MSI-HRD-ESG-025 | Introduction to ESG for the Steel Industry | Foundation/Awareness | |
| MSI-HRD-ESG-026 | Introduction to Green Steel and Low-Carbon Steel Concepts | Foundation/Awareness | |
| MSI-HRD-ESG-027 | Introduction to ISO Management Systems for Steel Organizations | Foundation/Awareness | |
| MSI-HRD-ESG-028 | ISO 14001 EMS - Awareness and Requirements for Steel Plants | Foundation/Awareness | |
| MSI-HRD-ESG-029 | ISO 14001 EMS Implementation for Steel Plants | Implementation | |
| MSI-HRD-ESG-030 | ISO 14001 EMS Internal Audit for Steel Plants | Internal Audit | |
| MSI-HRD-ESG-031 | Life Cycle Assessment (LCA) for Steel Products | General/Professional | |
| MSI-HRD-ESG-032 | Materiality Assessment and ESG Risk Management for Steel Companies | General/Professional | |
| MSI-HRD-ESG-033 | Preparing Steel Companies for Carbon Tax: Roles, Data and Readiness | General/Professional | |
| MSI-HRD-ESG-034 | ResponsibleSteel™ Production Standard - Awareness and Site Readiness | Foundation/Awareness | |
| MSI-HRD-ESG-035 | Steel Decarbonisation Pathways: BF-BOF, EAF, DRI and Beyond | General/Professional | |
| MSI-HRD-ESG-036 | Sustainability Accounting Certified Practitioner (SACP) | Certification | |
| MSI-HRD-ESG-037 | Sustainability Assurance Certified Practitioner (SAAP) | Certification | |
| MSI-HRD-ESG-038 | Sustainability Fundamentals for Steel Manufacturing and Operations | Foundation/Awareness | |
| MSI-HRD-ESG-039 | Transition Planning under IFRS S2 Climate Reporting | General/Professional | |
| MSI-HRD-ESG-040 | Driving Corporate Resilience: ESG Risk, Governance & Stakeholder Strategies - Leadership Simulation | Workshop |
Environment, Energy & Carbon
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-ENE-001 | Compressed Air & Centrifugal Pumps: Theory, Practice and Energy Optimisation | General/Professional |
| MSI-HRD-ENE-002 | Detailed Energy Audit for Electrical and Mechanical System | General/Professional |
| MSI-HRD-ENE-003 | Effective Air Pollution Emission Reduction and Control Management | General/Professional |
| MSI-HRD-ENE-004 | Scheduled Waste: Effective Management & Recovery Strategy | General/Professional |
| MSI-HRD-ENE-005 | Energy Audit Reporting under the Act | General/Professional |
| MSI-HRD-ENE-006 | Energy Auditing for Chiller Systems | General/Professional |
| MSI-HRD-ENE-007 | Energy Efficiency and Costs Optimization for Steel Manufacturing | General/Professional |
| MSI-HRD-ENE-008 | Energy Efficiency: Technical and Financial Analysis | General/Professional |
| MSI-HRD-ENE-009 | Energy Management and Audit | General/Professional |
| MSI-HRD-ENE-010 | Establishing Baseline Energy and Regression Analysis | General/Professional |
| MSI-HRD-ENE-011 | Financial Analysis for Energy Efficiency Projects | General/Professional |
| MSI-HRD-ENE-012 | Introduction to Carbon Emissions for Steel Plants | Foundation/Awareness |
| MSI-HRD-ENE-013 | Introduction to Organisational GHG Reporting as per GHG Protocol Standard | Foundation/Awareness |
| MSI-HRD-ENE-014 | ISO 50001 EMS - Awareness and Requirements for Steel Operations | Foundation/Awareness |
| MSI-HRD-ENE-015 | ISO 50001 EMS Implementation and Energy Management System Establishment | Implementation |
| MSI-HRD-ENE-016 | ISO 50001 EMS Internal Audit for Steel Plants | Internal Audit |
| MSI-HRD-ENE-017 | Large Scale Solar PV Operations and Maintenance | General/Professional |
| MSI-HRD-ENE-018 | Optimizing and Troubleshooting Air Pollution Control System | General/Professional |
| MSI-HRD-ENE-019 | Industrial Thermal Systems: Energy Efficiency & Carbon Reduction | General/Professional |
| MSI-HRD-ENE-020 | Penyelenggaraan & Penyelesaian Masalah Motor Elektrik Dan Meningkatkan Kecekapan Tenaga Elektrik dalam Industri & Kompleks | General/Professional |
| MSI-HRD-ENE-021 | Practical Energy Management & Efficiency in Electrical Equipment | General/Professional |
| MSI-HRD-ENE-022 | Power Quality Issues & Mitigation Solutions | General/Professional |
| MSI-HRD-ENE-023 | PV Solar System - Grid Parity with Modern Solar Power Systems | General/Professional |
| MSI-HRD-ENE-024 | REM & REA Registration and Duty Under Act | General/Professional |
| MSI-HRD-ENE-025 | Scheduled Waste Management (SW) Training | General/Professional |
| MSI-HRD-ENE-026 | Energy Management Gold Standard (EMGS) / ISO 50001:2018 Setup | General/Professional |
| MSI-HRD-ENE-027 | Solar PV Project Investment Insights: Technologies, Business Models, Regulation & Risk Mitigation | General/Professional |
| MSI-HRD-ENE-028 | Solar PV Risk Management | General/Professional |
| MSI-HRD-ENE-029 | Understanding Scope 1, 2 and 3 Emissions in Steel Manufacturing | General/Professional |
| MSI-HRD-ENE-030 | Utility-scale Battery Energy Storage Systems (BESS) | General/Professional |
| MSI-HRD-ENE-031 | Utility-Scale Solar PV Performance & Degradation Management | General/Professional |
| MSI-HRD-ENE-032 | Waste to Wisdom: Sustainability Approaches to Scheduled Waste | General/Professional |
| MSI-HRD-ENE-033 | Energy Saving Measures in Electric Motor Systems | Workshop |
| MSI-HRD-ENE-034 | Certified Environmental Professional in Bag Filter Operation (CePBFO) | Certification |
| MSI-HRD-ENE-035 | Certified Environmental Professional in Industrial Effluent Treatment Systems - Physical Chemical Process (CePIETSO-PCP) | Certification |
| MSI-HRD-ENE-036 | Certified Environmental Professional in Scheduled Waste Management (CePSWaM) | Certification |
| MSI-HRD-ENE-037 | Certified Environmental Professional in Scrubber Operation (CePSO) | Certification |
Occupational Safety & Health
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-OSH-001 | Basic Fire Safety & Emergency Preparedness | General/Professional |
| MSI-HRD-OSH-002 | Basic Occupational First Aid, CPR & AED | General/Professional |
| MSI-HRD-OSH-003 | Environmental, Safety & Health Legal Compliance Obligations | General/Professional |
| MSI-HRD-OSH-004 | Hazard Identification, Risk Assessment & Risk Control (HIRARC) | General/Professional |
| MSI-HRD-OSH-005 | Hazardous Materials Management and Spill Prevention | General/Professional |
| MSI-HRD-OSH-006 | Hearing Conservation Programme | General/Professional |
| MSI-HRD-OSH-007 | ISO 45001 OHS - Awareness and Requirements for Steel Facilities | Foundation/Awareness |
| MSI-HRD-OSH-008 | ISO 45001 OHS Implementation in Steel Facilities | Implementation |
| MSI-HRD-OSH-009 | ISO 45001 OHS Internal Audit for Steel Plants | Internal Audit |
| MSI-HRD-OSH-010 | Lockout/Tagout Safety Awareness | Foundation/Awareness |
| MSI-HRD-OSH-011 | Occupational Safety & Health (OSH) Legal Compliance for the Iron & Steel Industry | General/Professional |
| MSI-HRD-OSH-012 | OSH2 - Industry Hygiene Training Programme | General/Professional |
| MSI-HRD-OSH-013 | OSH3 - Plant & Machine Safety | General/Professional |
| MSI-HRD-OSH-014 | Safe Handling of Chemicals | General/Professional |
| MSI-HRD-OSH-015 | Safe Handling of Forklift and Reach Truck | General/Professional |
| MSI-HRD-OSH-016 | Sistem Pencegahan Kebakaran - Operasi dan Penyelenggaraan | General/Professional |
| MSI-HRD-OSH-017 | Understanding Safety & Health Legal Requirements (OSHA) with Latest Amendments | General/Professional |
| MSI-HRD-OSH-018 | Authorised Entrant & Standby Person for Confined Space (AESP) | General/Professional |
| MSI-HRD-OSH-019 | Authorised Entrant & Standby Person for Confined Space (AESP) - Refresher | Refresher |
| MSI-HRD-OSH-020 | Authorised Gas Tester & Entry Supervisor for Confined Space (AGTES) | General/Professional |
| MSI-HRD-OSH-021 | Authorised Gas Tester & Entry Supervisor for Confined Space (AGTES) - Refresher | Refresher |
| MSI-HRD-OSH-022 | Occupational Safety & Health Coordinator | General/Professional |
| MSI-HRD-OSH-023 | Oil and Gas Safety Passport Refresher | Refresher |
| MSI-HRD-OSH-024 | Working Safely at Height | General/Professional |
Quality Management & Productivity
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-QMS-001 | ISO 9001:2015 Awareness & Requirements | Foundation/Awareness |
| MSI-HRD-QMS-002 | ISO 9001:2015 Internal Audit | Internal Audit |
| MSI-HRD-QMS-003 | Lean Production System | General/Professional |
| MSI-HRD-QMS-004 | Failure Mode and Effects Analysis (FMEA) | General/Professional |
| MSI-HRD-QMS-005 | Problem Solving Using QC Tools | General/Professional |
| MSI-HRD-QMS-006 | Risk & Opportunity Management for ISO 9001:2015 | General/Professional |
Trade & Market Access
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-TRD-001 | Possible Impact of RCEP and CPTPP on Malaysia's Iron & Steel Industry | General/Professional |
| MSI-HRD-TRD-002 | WTO Anti-Dumping International Level & Anti-Circumvention (US Practice) | General/Professional |
| MSI-HRD-TRD-003 | Trade Practices for the Iron & Steel Industry | General/Professional |
Digital Skills & AI
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-DIG-001 | AI-Powered Leadership and Stakeholder Management | General/Professional |
| MSI-HRD-DIG-002 | Basics of Cybersecurity | Foundation/Awareness |
| MSI-HRD-DIG-003 | Building a Digital Marketing Strategy for the Iron & Steel Industry | General/Professional |
| MSI-HRD-DIG-004 | Digital Readiness and Future Skills | General/Professional |
| MSI-HRD-DIG-005 | E-Commerce for the Iron & Steel Industry | General/Professional |
| MSI-HRD-DIG-006 | Generative AI Mastery for Modern Marketing Teams | General/Professional |
| MSI-HRD-DIG-007 | Microsoft Excel - Advanced Analysis | Advanced |
| MSI-HRD-DIG-008 | Microsoft Excel - Basic/Foundation | General/Professional |
| MSI-HRD-DIG-009 | Microsoft Excel - Dashboard & Data Visualisation | General/Professional |
| MSI-HRD-DIG-010 | Microsoft Excel - Intermediate for Monitoring & Tracking | General/Professional |
Leadership, Management & Soft Skills
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-LDR-001 | Communication & Influence: Essential Tools for Effective Interpersonal Communication | General/Professional |
| MSI-HRD-LDR-002 | Critical Thinking and Problem Solving | General/Professional |
| MSI-HRD-LDR-003 | Impact Presentation | General/Professional |
| MSI-HRD-LDR-004 | Leading in a Global Context | General/Professional |
| MSI-HRD-LDR-005 | Mastering Effective Management: From Motivation to Team Success | General/Professional |
| MSI-HRD-LDR-006 | Prioritising Mental Health, Strengthening Workplace Safety | General/Professional |
| MSI-HRD-LDR-007 | Revenue Driver Analysis - A Hands-On Workshop | Workshop |
| MSI-HRD-LDR-008 | Stress Management for Work Performance | General/Professional |
| MSI-HRD-LDR-009 | Leadership: Positive Mindset Towards Transformational Change | General/Professional |
| MSI-HRD-LDR-010 | Team Building for the Iron & Steel Industry | General/Professional |
| MSI-HRD-LDR-011 | Iron and Steel C-Suite Executive Program | General/Professional |
| MSI-HRD-LDR-012 | Iron and Steel Emerging Entrepreneur Program | General/Professional |
| MSI-HRD-LDR-013 | Iron and Steel Leadership Program | General/Professional |
Iron & Steel Technical
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-TEC-001 | Blast Furnace Process | Advanced Technical Upskilling |
| MSI-HRD-TEC-002 | RMK12 Extensive Training - Blast Furnace Steelmaking | Foundation/Extensive |
| MSI-HRD-TEC-003 | RMK12 Extensive Training - Flat Product | Foundation/Extensive |
| MSI-HRD-TEC-004 | RMK12 Extensive Training - Ordinary Steelmaking | Foundation/Extensive |
| MSI-HRD-TEC-005 | Rolling Mill Process & Product Quality - Cold Rolling / Flat Product | Advanced Technical Upskilling |
| MSI-HRD-TEC-006 | Rolling Mill Process & Product Quality - Long Product | Advanced Technical Upskilling |
| MSI-HRD-TEC-007 | Steelmaking Process & Product Quality | Advanced Technical Upskilling |
| MSI-HRD-TEC-008 | BS PD 5500 - Design of Unfired Pressure Vessels | General/Professional |
| MSI-HRD-TEC-009 | Delta ASD-A2 Servo Drive - Programming and Commissioning | General/Professional |
| MSI-HRD-TEC-010 | Steel Metallurgy: Properties, Process and Heat Treatment | General/Professional |
Business, Finance & Operations
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-BUS-001 | E-Invoicing Implementation for Business | Implementation |
| MSI-HRD-BUS-002 | Cost Reduction Strategy for Manufacturing | General/Professional |
| MSI-HRD-BUS-003 | TaxPod Masterclass | Advanced/Masterclass |
Skills Certification & HRD
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-SKL-001 | HRD Corp/HRDF Programme Awareness for Iron & Steel Employers | Foundation/Awareness |
| MSI-HRD-SKL-002 | Malaysian Skills Certificate (SKM) Awareness for the Steel Industry | Foundation/Awareness |
Standards & Product Compliance
| Programme Code | Programme Title | Level |
|---|---|---|
| MSI-HRD-STD-000 | MSI Iron & Steel Standards Training Series (NSC16) | Modular / Standard-specific |
4. Iron & Steel Technical Training Pathways
MSI's technical training pathway includes intensive foundation programmes and advanced technical upskilling programmes covering steelmaking, blast furnace operations, rolling processes and product quality.
| Programme Code | Programme | Level | Duration | Programme Scope / Modules |
|---|---|---|---|---|
| MSI-HRD-TEC-004 | RMK12 Extensive Training - Ordinary Steelmaking | Foundation/Extensive | 15 days | Introduction to Steelmaking Industry; Ironmaking; Fundamental of Steelmaking technology and process (3 days); Rolling process; Steelmaking operation; Steelmaking maintenance; Fundamental of steel product quality system; Raw material for steelmaking; Introduction to steel products; Continual Improvement; Communication Skill; Operational Safety; ESG Awareness. |
| MSI-HRD-TEC-002 | RMK12 Extensive Training - Blast Furnace Steelmaking | Foundation/Extensive | 15 days | Introduction to Steelmaking Industry; Ironmaking; Extended Ironmaking; Fundamental of Steelmaking technology and process (2 days); Rolling process; Steelmaking operation; Steelmaking maintenance; Fundamental of steel product quality system; Raw material for steelmaking; Introduction to steel products; Continual Improvement; Communication Skill; Operational Safety; ESG Awareness. |
| MSI-HRD-TEC-003 | RMK12 Extensive Training - Flat Product | Foundation/Extensive | 15 days | Introduction to Steelmaking Industry; Ironmaking; Fundamental of Steelmaking technology and process (2 days); Extended Steelmaking technology and process on Flat; Rolling process; Steelmaking operation; Steelmaking maintenance; Fundamental of steel product quality system; Raw material for steelmaking; Introduction to steel products; Continual Improvement; Communication Skill; Operational Safety; ESG Awareness. |
| MSI-HRD-TEC-007 | Steelmaking Process & Product Quality | Advanced Technical Upskilling | 10 days | Electric Furnace Steelmaking; Oxygen Steelmaking (BOF); Ladle Refining; Vacuum Degassing; Refining of Stainless Steel; Steel Making Refractories; Steel Plant Refractories; Continuous Casting of Steel Billet; Tundish Operation; Solidification of Steel. |
| MSI-HRD-TEC-006 | Rolling Mill Process & Product Quality - Long Product | Advanced Technical Upskilling | 10 days | Rolling Process; Rolling Mill Equipment; Roll Pass Design; Utility Requirement; TMT; Billet Quality Requirement for Rolling; Final Product Quality Control; Process Parameter Control. |
| MSI-HRD-TEC-005 | Rolling Mill Process & Product Quality - Cold Rolling / Flat Product | Advanced Technical Upskilling | 10 days | Material Science Basic; EAF & BOF Steelmaking; Ladle Refining & Vacuum Degassing; Solidification of Steel; TMT; Rolling Mill Fundamental; Rolling Process; Cold Rolling Fundamental; Cold Rolled Production Control; Cold Rolled Product Quality and Accuracy. |
| MSI-HRD-TEC-001 | Blast Furnace Process | Advanced Technical Upskilling | 10 days | Iron Ore Mining Fundamentals; Cokemaking; Pelletising; Sintering; Blast Furnace Fundamental; Blast Furnace Physics & Chemistry; Transmission Process; Energy Utilisation; Blast Furnace Production Process; Iron Making Raw Material Performance Analysis. |
5. MSI Iron & Steel Standards Training Series (NSC16)
MSI is developing a standards-based training series linked to 235 NSC16 standard-specific module candidates. These modules are a development pipeline: each requires a final course outline, learning outcomes, duration and trainer approval before launch.
Proposed module naming approach
Understanding & Application of [MS Number]: [Standard Title]” - allowing standards to be converted into practical, industry-oriented training modules.
| Module Code | MS Number | Standard Title | Training Theme |
|---|---|---|---|
| MSI-HRD-STD-001 | MS 1004:1986 | METHODS OF CHEMICAL ANALYSIS OF SOFT SOLDER | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-002 | MS 1005:1986 | METHODS OF CHEMICAL ANALYSIS OF WHITE METAL BEARING ALLOYS | Testing, Sampling & Analysis |
| MSI-HRD-STD-003 | MS 1006:1986 | METHODS OF TEST FOR RESIN FLUX CORED SOLDER | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-004 | MS 1076:2012 | TINPLATE AND BLACKPLATE - SPECIFICATION (FIRST REVISION) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-005 | MS 1114:PART 1:1988 | METHOD OF TEST FOR BAUXITE PART 1 : DETERMINATION OF MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-006 | MS 1114:PART 2:1990 | METHOD OF TEST FOR BAUXITE PART 2 : DETERMINATION OF LOSS OF MASS AT 1075 °C – GRAVIMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-007 | MS 1114:PART 3:1990 | METHOD OF TEST FOR BAUXITE PART 3 : DETERMINATION OF ALUMINIUM CONTENT -EDTA TITRIMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-008 | MS 1114:PART 4:1990 | METHOD OF TEST FOR BAUXITE PART 4 : DETERMINATION OF TOTAL SILICON CONTENT - COMBINED GRAVIMETRIC AND SPECTROPHOTOMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-009 | MS 1114:PART 5:1990 | METHOD OF TEST FOR BAUXITE PART 5 : DETERMINATION OF IRON CONTENT TITRIMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-010 | MS 1114:PART 6:1990 | METHOD OF TEST FOR BAUXITE PART 6 : DETERMINATION OF TITANIUM CONTENT -4, 4' -DIANTIPYRYLMETHANE SPECTROPHOTOMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-011 | MS 1114:PART 7:1991 | METHOD OF TEST FOR BAUXITE : PART 7 : DETERMINATION OF PHOSPHORUS CONTENT - MOLYBDENUM BLUE SPECTROPHOTOMETRIC METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-012 | MS 1137:2009 | LOW CARBON STEEL WIRES - SPECIFICATION (FIRST REVISION) | Wire, Rod & Wire Products |
| MSI-HRD-STD-013 | MS 1138:Part 2:2007 (CONFIRMED: 2021) | PRESTRESSING STEEL - PART 2: COLD-DRAWN WIRE | Reinforcement & Construction Steel |
| MSI-HRD-STD-014 | MS 1138:Part 1:2007 | PRESTRESSING STEEL - PART 1: GENERAL REQUIREMENTS | Reinforcement & Construction Steel |
| MSI-HRD-STD-015 | MS 1138:Part 3:2007 | PRESTRESSING STEEL - PART 3: STEEL BARS (QUENCHED AND TEMPERED) | Reinforcement & Construction Steel |
| MSI-HRD-STD-016 | MS 1138:Part 4:2007 | PRESTRESSING STEEL - PART 4: STRAND FOR PRESTRESSED CONCRETE | Reinforcement & Construction Steel |
| MSI-HRD-STD-017 | MS 1237:1991 (CONFIRMED:2008) | SPECIFICATION FOR GENERAL PURPOSE GALVANIZED STEEL WIRE STRAND | Wire, Rod & Wire Products |
| MSI-HRD-STD-018 | MS 1238:2009 (CONFIRMED:2016) | CONDUCTORS FOR OVERHEAD LINES - ZINC COATED STEEL WIRES (FIRST REVISION) | Wire, Rod & Wire Products |
| MSI-HRD-STD-019 | MS 1239-1:2009 | ZINC OR ZINC COATED NON-ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - LAND CABLES (FIRST REVISION) | Wire, Rod & Wire Products |
| MSI-HRD-STD-020 | MS 1239-2:2009 | ZINC OR ZINC ALLOY COATED NON_ALLOY STEEL WIRE FOR ARMOURING EITHER POWER CABLES OR TELECOMMUNICATION CABLES - PART 2: SUBMARINE CABLES (FIRST REVISION) | Wire, Rod & Wire Products |
| MSI-HRD-STD-021 | MS 1247:2005 | DESCRIPTION AND MARKING OF ARTICLES OF, OR CONTAINING PRECIOUS METAL - CODE OF PRACTICE (FIRST REVISION) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-022 | MS 1365:PART 1:1994 | METHODS OF TEST FOR STANDARD OF FINENESS OF PRECIOUS METALS : PART 1 : GOLD AND ARTICLES OF GOLD ALLOY BY CUPELLATION METHOD | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-023 | MS 1366:1994 | METHODS OF SAMPLING FOR PRECIOUS METALS | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-024 | MS 1438:1998 | SPECIFICATION FOR SCHEDULING DIMENSIONING, BENDING AND CUTTING OF STEEL REINFORCEMENT FOR CONCRETE | Reinforcement & Construction Steel |
| MSI-HRD-STD-025 | MS 144:2014 | STEEL WIRE FOR THE REINFORCEMENT OF CONCRETE PRODUCTS - SPECIFICATION (FOURTH REVISION) | Reinforcement & Construction Steel |
| MSI-HRD-STD-026 | MS 145:2014 | STEEL FABRIC FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (FOURTH REVISION) | Reinforcement & Construction Steel |
| MSI-HRD-STD-027 | MS 1453:1999 | METHOD OF ANALYSIS FOR LIQUID IRON-BASED COAGULANTS | General Metallic Materials & Product Standards |
| MSI-HRD-STD-028 | MS 146:2006 | HOT ROLLED STEEL BARS FOR THE REINFORCEMENT OF CONCRETE - SPECIFICATION (THIRD REVISION) | Reinforcement & Construction Steel |
| MSI-HRD-STD-029 | MS 146:2014 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - BAR, COIL AND DECOILED PRODUCT - SPECIFICATION (FOURTH REVISION) | Reinforcement & Construction Steel |
| MSI-HRD-STD-030 | MS 1463:2008 (CONFIRMED:2016) | GREY CAST IRONS - CLASSIFICATION (FIRST REVISION) (ISO 185:2005, MOD) | Cast Iron & Steel Castings |
| MSI-HRD-STD-031 | MS 1493:2000 (CONFIRMED:2021) | SPECIFICATION FOR DIRECT REDUCED IRON (DRI) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-032 | MS 1494:2000 | SPECIFICATION FOR BILLETS FOR HOT ROLLED NON-ALLOYED STEEL BARS AND RODS | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-033 | MS 1495:2014 | BLOOMS/BILLETS FOR HOT ROLLED NON-ALLOYED STRUCTURAL STEEL SECTIONS - SPECIFICATION (FIRST REVISION) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-034 | MS 1496:2000 | SPECIFICATION FOR BEAM BLANKS FOR HOT ROLLED NON-ALLOYED STRUCTURAL STEEL SECTIONS | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-035 | MS 1705:2003 | HOT-ROLLED CARBON STEEL STRIP AND SHEET OF COMMERCIAL AND DRAWING QUALITIES | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-036 | MS 1768:2004 | HOT-ROLLED CARBON STEEL STRIP FOR PIPES AND TUBES | Pipes & Tubes |
| MSI-HRD-STD-037 | MS 1795:2005 | STEELS FOR COLD HEADING AND COLD EXTRUDING - SPECIFICATION (ISO 4954:1993, NEQ) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-038 | MS 1796:2005 | CAST CARBON STEELS FOR GENERAL ENGINEERING PURPOSES | General Metallic Materials & Product Standards |
| MSI-HRD-STD-039 | MS 1828:2013 | SPHEROIDAL GRAPHITE CAST IRON - CLASSIFICATION (FIRST REVISION) (ISO 1083:2004, MOD) | Cast Iron & Steel Castings |
| MSI-HRD-STD-040 | MS 1846:2016 | STEEL AND STEEL PRODUCTS – GENERAL TECHNICAL DELIVERY REQUIREMENTS (FIRST REVISION) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-041 | MS 1848:2005 | ALUMINIUM AND ALUMINIUM ALLOYS - FOILS | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-042 | MS 1945:2006 | FREE CUTTING STEELS | General Metallic Materials & Product Standards |
| MSI-HRD-STD-043 | MS 1967:2007 | AUSTENITIC MANGANESE STEEL CASTINGS (ISO 13521:1999, MOD) | Cast Iron & Steel Castings |
| MSI-HRD-STD-044 | MS 2025:Part 1:2006 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-045 | MS 2025:Part 2:2006 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 2: TOLERANCES ON SHAPE AND DIMENSION | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-046 | MS 2040:2007 | ALUMINIUM AND ALUMINIUM ALLOY - SHEETS AND COILED SHEETS - SPECIFICATION | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-047 | MS 2053:2007 | FERROUS PRODUCTS - HEAT TREATMENTS - VOCABULARY (ISO 4885:1996, MOD) | Heat Treatment & Metallurgy |
| MSI-HRD-STD-048 | MS 2098:2008 | AUSTENITIC CAST IRONS - CLASSIFICATION (ISO 2892:2007, MOD) | Cast Iron & Steel Castings |
| MSI-HRD-STD-049 | MS 2205:2008 | HIGH STRENGTH STEEL CASTINGS FOR STRUCTURAL PURPOSES - SPECIFICATION | Cast Iron & Steel Castings |
| MSI-HRD-STD-050 | MS 2240-2:2009 | STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS (ISO 16143-2:2004, MOD) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-051 | MS 2240-3:2010 | STAINLESS STEELS FOR GENERAL PURPOSES - PART 3: WIRE (ISO 16143-3:2005, MOD) | Wire, Rod & Wire Products |
| MSI-HRD-STD-052 | MS 2247:2015 | CARBON STEELS FOR MACHINE STRUCTURAL USE - SPECIFICATION | General Metallic Materials & Product Standards |
| MSI-HRD-STD-053 | MS 2283:2009 | METALLIC MATERIALS - FATIGUE TESTING - AXIAL FORCE-CONTROLLED METHOD (ISO 1099:2006, MOD) | Testing, Sampling & Analysis |
| MSI-HRD-STD-054 | MS 2289:2010 | ALUMINIUM AND ALUMINIUM ALLOY - EXTRUDED SHAPES | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-055 | MS 2298:2010 | ROLLED CARBON STEEL FOR COLD-FINISHED STEEL BARS | General Metallic Materials & Product Standards |
| MSI-HRD-STD-056 | MS 2319:2010 | SPECIFICATION FOR WIRE RODS FOR CORE WIRE COVERED ELECTRODE | Wire, Rod & Wire Products |
| MSI-HRD-STD-057 | MS 2332:2010 (CONFIRMED: 2021) | STEEL AND IRON - SAMPLING AND PREPARATION OF SAMPLES FOR THE DETERMINATION OF CHEMICAL COMPOSITION (ISO 14284:1996, MOD) | Testing, Sampling & Analysis |
| MSI-HRD-STD-058 | MS 2338:2010 (CONFIRMED:2016) | STEEL FIBRES FOR CONCRETE - DEFINITIONS, SPECIFICATIONS AND CONFORMITY | Reinforcement & Construction Steel |
| MSI-HRD-STD-059 | MS 2383:2011 | PREFINISHED/PREPAINTED SHEET METAL PRODUCTS FOR INTERIOR/EXTERIOR BUILDING APPLICATIONS - PERFORMANCE REQUIREMENTS | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-060 | MS 2384:2011 | CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF STRUCTURAL QUALITY (SECOND REVISION) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-061 | MS 2385:2011 | CONTINUOUS HOT-DIP ZINC-COATED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES (SECOND REVISION) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-062 | MS 2386:2010 | CORROSION-RESISTANT CAST STEELS FOR GENERAL APPLICATIONS (ISO 11972:1998, MOD) | Cast Iron & Steel Castings |
| MSI-HRD-STD-063 | MS 2412:2011 | VINYL (PVC) COATED STEEL WIRE AND WELDED WIRE FABRIC FOR REINFORCEMENT | Reinforcement & Construction Steel |
| MSI-HRD-STD-064 | MS 2414:2011 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - STEEL WIRE CHAIN LINK FENCING | Wire, Rod & Wire Products |
| MSI-HRD-STD-065 | MS 2416:2011 | UNCOATED EXPANDED METAL CARBON STEEL SHEETS FOR GENERAL PURPOSES - SPECIFICATION | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-066 | MS 2479-1:2012 | OIL TEMPERED WIRE - PART 1: MECHANICAL SPRINGS | Wire, Rod & Wire Products |
| MSI-HRD-STD-067 | MS 2479-2:2012 | OIL TEMPERED WIRE - PART 2: VALVE SPRINGS | Wire, Rod & Wire Products |
| MSI-HRD-STD-068 | MS 2480-1:2012 | HARD DRAWN STEEL WIRES - PART 1: PRINCIPALLY FOR STATIC LOAD | Wire, Rod & Wire Products |
| MSI-HRD-STD-069 | MS 2480-2:2012 | HARD DRAWN STEEL WIRES - PART 2: PRINCIPALLY FOR DYNAMIC LOAD | Wire, Rod & Wire Products |
| MSI-HRD-STD-070 | MS 2500:2012 | ROOFING PRODUCTS FROM METAL SHEET - SELF-SUPPORTING PRODUCTS OF STEEL SHEET - SPECIFICATION | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-071 | MS 2543:2014 | ELECTROLYTIC ZINC-COATED STEEL SHEET AND STRIP | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-072 | MS 2592:2015 | BEAD WIRE - SPECIFICATION | Wire, Rod & Wire Products |
| MSI-HRD-STD-073 | MS 2651:2015 | COLD-REDUCED CARBON STEEL SHEET AND STRIP OF COMMERCIAL AND DRAWING QUALITIES | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-074 | MS 2658:2016 | HOT ROLLED STEEL FLOOR PLATES - SPECIFICATION | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-075 | MS 2659:2016 | LOW-ALLOYED STEELS FOR MACHINE STRUCTURAL USE - SPECIFICATION | General Metallic Materials & Product Standards |
| MSI-HRD-STD-076 | MS 2664:2016 | ALLOYED SPRING STEELS - SPECIFICATION | Wire, Rod & Wire Products |
| MSI-HRD-STD-077 | MS 2667:2016 | ALLOY STEEL BOLTING MATERIALS FOR HIGH TEMPERATURE SERVICE | General Metallic Materials & Product Standards |
| MSI-HRD-STD-078 | MS 2668:2016 | ALLOY STEEL BARS FOR SPECIAL APPLICATION BOLTING MATERIALS | General Metallic Materials & Product Standards |
| MSI-HRD-STD-079 | MS 2674-1:2017 | HOT ROLLED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-080 | MS 2674-2:2017 | HOT ROLLED STEEL SHEET PILING OF NON ALLOY STEELS - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-081 | MS 271:1993 | SPECIFICATION FOR RED IRON OXIDE PRIMER | General Metallic Materials & Product Standards |
| MSI-HRD-STD-082 | MS 303:1975 | SPECIFICATION FOR FOUNDRY PIG IRON | General Metallic Materials & Product Standards |
| MSI-HRD-STD-083 | MS 407-1:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 1: GENERAL PRINCIPLES | Wire, Rod & Wire Products |
| MSI-HRD-STD-084 | MS 407-2:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 2: ZINC OR ZINC ALLOY COATING (SECOND REVISION) | Wire, Rod & Wire Products |
| MSI-HRD-STD-085 | MS 407-3:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 3: ALUMINIUM COATINGS | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-086 | MS 407-4:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 4: TIN COATINGS | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-087 | MS 407-5:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 5: NICKEL COATINGS | Wire, Rod & Wire Products |
| MSI-HRD-STD-088 | MS 407-6:2012 | STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 6: COPPER, BRONZE OR BRASS COATINGS | Wire, Rod & Wire Products |
| MSI-HRD-STD-089 | MS 505:2005 (CONFIRMED: 2021) | IRON ORE FOR THE PRODUCTION OF PIG IRON - GENERAL REQUIREMENTS (FIRST REVISION) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-090 | MS 536:1977 (CONFIRMED:2004) | METHOD FOR THE SAMPLING OF BARYTES | Testing, Sampling & Analysis |
| MSI-HRD-STD-091 | MS 571:1991 | SPECIFICATION FOR INGOT TIN (FIRST REVISION) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-092 | MS 841:1983 | SPECIFICATION FOR FERROSILICON | General Metallic Materials & Product Standards |
| MSI-HRD-STD-093 | MS 844:1983 | METHODS OF CHEMICAL ANALYSIS OF FERROSILICON AND FERROMANGANESE | Testing, Sampling & Analysis |
| MSI-HRD-STD-094 | MS 870:2005 | SOFT SOLDER ALLOYS - SPECIFICATION (FIRST REVISION) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-095 | MS 877:1984 | METHODS OF SAMPLING COPPER ORES AND CONCENTRATES | Testing, Sampling & Analysis |
| MSI-HRD-STD-096 | MS 886:1984 | METHODS FOR THE DETERMINATION OF MOISTURE CONTENT AND CHEMICAL ANALYSIS OF COPPER ORES AND CONCENTRATES | Testing, Sampling & Analysis |
| MSI-HRD-STD-097 | MS 907:1987 | METHOD OF SAMPLING FOR BAUXITE USE IN THE PRODUCTION OF ALUMINIUM | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-098 | MS 964:1985 | SPECIFICATION FOR RESIN FLUX CORED SOLDER | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-099 | MS 965:1985 | SPECIFICATION FOR WHITE METAL BEARING ALLOYS | General Metallic Materials & Product Standards |
| MSI-HRD-STD-100 | MS EN 10025-1:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY (SECOND REVISION) | Structural Steel & Sections |
| MSI-HRD-STD-101 | MS EN 10025-2:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2 TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS (SECOND REVISION) | Structural Steel & Sections |
| MSI-HRD-STD-102 | MS EN 10025-3:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS | Structural Steel & Sections |
| MSI-HRD-STD-103 | MS EN 10025-4:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4:TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS | Structural Steel & Sections |
| MSI-HRD-STD-104 | MS EN 10025-5:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE | Structural Steel & Sections |
| MSI-HRD-STD-105 | MS EN 10025-6:2011 | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION | Structural Steel & Sections |
| MSI-HRD-STD-106 | MS EN 10080:2014 | STEEL FOR THE REINFORCEMENT OF CONCRETE - WELDABLE REINFORCING STEEL - GENERAL | Reinforcement & Construction Steel |
| MSI-HRD-STD-107 | MS EN 1396:2012 (P) | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATION | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-108 | MS ISO 10258:2005 | COPPER SULFIDE CONCENTRATES - DETERMINATION OF COPPER CONTENT - TITRIMETRIC METHODS (ISO 10258:1994, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-109 | MS ISO 10378:2005 | COPPER SULFIDE CONCENTRATES - DETERMINATION OF GOLD AND SILVER CONTENTS - FIRE ASSAY GRAVIMETRIC AND ATOMIC ABSORBTION SPECTROMETRIC METHOD (ISO 10378:1994, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-110 | MS ISO 10469:2005 | COPPER SULFIDE CONCENTRATES - DETERMINATION OF COPPER CONTENT - ELECTROGRAVIMETRIC METHOD (ISO 10469:1994, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-111 | MS ISO 11426:2006 | DETERMINATION OF GOLD IN GOLD JEWELLERY ALLOYS - CUPELLATION METHOD (FIRE ASSAY) (ISO 11426:1997, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-112 | MS ISO 1143:2015 | METALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING (FIRST REVISION)(ISO 1143:2010, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-113 | MS ISO 11489:2007 | DETERMINATION OF PLATINUM IN PLATINUM JEWELLERY ALLOYS - GRAVIMETRIC DETERMINATION BY REDUCTION WITH MERCURY (I) CHLORIDE (ISO 11489:1995, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-114 | MS ISO 11534:2011 (Confirmed:2025) | IRON ORES - DETERMINATION OF TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) (ISO 11534:2006, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-115 | MS ISO 11596:2010 | JEWELLERY - SAMPLING OF PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS (ISO 11596:2008, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-116 | MS ISO 11973:2007 | HEAT-RESISTANT CAST STEELS AND ALLOYS FOR GENERAL APPLICATIONS (ISO 11973:1999, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-117 | MS ISO 13310:2004 (CONFIRMED:2021) | IRON ORES - DETERMINATION OF ZINC CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD | Testing, Sampling & Analysis |
| MSI-HRD-STD-118 | MS ISO 1352:2015 | METALLIC MATERIALS - TORQUE-CONTROLLED FATIGUE TESTING (FIRST REVISION) (ISO 1352:2011, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-119 | MS ISO 13887:2014 | COLD-REDUCED STEEL SHEET OF HIGHER YIELD STRENGTH WITH IMPROVED FORMABILITY (ISO 13887:2011, IDT) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-120 | MS ISO 14590:2014 | COLD-REDUCED STEEL SHEET OF HIGH TENSILE STRENGTH AND LOW YIELD POINT WITH IMPROVED FORMABILITY (ISO 14590:2005, IDT) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-121 | MS ISO 148-1:2008 (CONFIRMED: 2021) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2006, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-122 | MS ISO 148-2:2008 (CONFIRMED: 2021) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 2: VERIFICATION OF TEST MACHINES (ISO 148-2:1998, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-123 | MS ISO 148-3:2008 (CONFIRMED: 2021) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V REFERENCE TEST PIECES FOR VERIFICATION OF TEST MACHINES (ISO 148-3:1998, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-124 | MS ISO 15630-1:2012 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE (ISO 15630-1:2010, IDT) | Reinforcement & Construction Steel |
| MSI-HRD-STD-125 | MS ISO 15630-2:2012 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC (ISO 15630-2:2010, IDT) | Reinforcement & Construction Steel |
| MSI-HRD-STD-126 | MS ISO 15630-3:2009 | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL | Reinforcement & Construction Steel |
| MSI-HRD-STD-127 | MS ISO 16020:2007 (CONFIRMED: 2021) | STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - VOCABULARY (ISO 16020:2005, IDT) | Reinforcement & Construction Steel |
| MSI-HRD-STD-128 | MS ISO 16120-1:2008 | NON-ALLOY STEEL WIRE FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (FIRST REVISION) (ISO 16120-1:2001, IDT) | Wire, Rod & Wire Products |
| MSI-HRD-STD-129 | MS ISO 16120-2:2008 | NON-ALLOY STEEL WIRE FOR CONVERSION TO WIRE - PART 2: SPECIFIC REQUIREMENTS FOR GENERAL PURPOSE WIRE ROD (FIRST REVISION) (ISO 16120-2:2001, IDT) | Wire, Rod & Wire Products |
| MSI-HRD-STD-130 | MS ISO 204:2005 | METALLIC MATERIALS - UNINTERRUPTED UNAXIAL CREEP TESTING IN TENSION - METHOD OF TEST(ISO 204:1997, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-131 | MS ISO 21988:2007 (Confirmed:2025) | ABRASION-RESISTANT CAST IRONS - CLASSIFICATION (ISO 21988:2006, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-132 | MS ISO 2596:2011 | IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC, KARL FISHER AND MASS-LOSS METHODS (FIRST REVISION) (ISO 2596:2006, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-133 | MS ISO 2597-1:2011 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF TOTAL IRON CONTENT - PART 1:TITRIMETRIC METHOD AFTER TIN(II) CHLORIDE REDUCTION (FIRST REVISION) (ISO 2597-1:2006, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-134 | MS ISO 2598-1:2002 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF SILICON CONTENT - PART 1: GRAVIMETRIC METHODS | Testing, Sampling & Analysis |
| MSI-HRD-STD-135 | MS ISO 2598-2:2002 (CONFIRMED:2021) | IRON ORES - DETERMINATION OF SILICON CONTENT - PART 2: REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD | Testing, Sampling & Analysis |
| MSI-HRD-STD-136 | MS ISO 2599:2004 (CONFIRMED:2021) | IRON ORES - DTERMINATION OF PHOSPHORUS CONTENT - TITRIMETRIC METHOD | General Metallic Materials & Product Standards |
| MSI-HRD-STD-137 | MS ISO 3082:2010 | IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES (FIRST REVISION) (ISO 3082:2009, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-138 | MS ISO 3084:2002 (CONFIRMED:2021) | IRON ORES - EXPERIMENTAL METHODS FOR EVALUATION OF QUALITY VARIATION | General Metallic Materials & Product Standards |
| MSI-HRD-STD-139 | MS ISO 3085:2010 | IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE PRECISION OF SAMPLING, SAMPLE PREPARATION AND MEASUREMENT (FIRST REVISION)(ISO 3085:2002, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-140 | MS ISO 3086:2010 (CONFIRMED: 2021) | IRON ORES - EXPERIMENTAL METHODS FOR CHECKING THE BIAS OF SAMPLING (FIRST REVISION)(ISO 3086:2006, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-141 | MS ISO 3087:2002 (CONFIRMED:2013) | IRON ORES - DETERMINATION OF THE MOISTURE CONTENT OF A LOT | Testing, Sampling & Analysis |
| MSI-HRD-STD-142 | MS ISO 3310-1:2002 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1 : TEST SIEVES OF METAL WIRE CLOTH | Wire, Rod & Wire Products |
| MSI-HRD-STD-143 | MS ISO 3310-2:2002 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 2: TEST SIEVES OF PERFORATED METAL PLATE | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-144 | MS ISO 376:2015 (CONFIRMED: 2021) | METALLIC MATERIALS - CALIBRATION OF FORCE-PROVING INSTRUMENTS USED FOR THE VERIFICATION OF UNIAXIAL TESTING MACHINES (FIRST REVISION) (ISO 376:2011, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-145 | MS ISO 3852:2010 (Confirmed:2025) | IRON ORES FOR BLAST FURNACE AND DIRECT REDUCTION FEEDSTOCKS - DETERMINATION OF BULK DENSITY (FIRST REVISION) (ISO 3852:2007, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-146 | MS ISO 4159:2003 (CONFIRMED: 2021) | FERROMANGANESE AND FERROSILICOMANGANESE CONTENT - POTENTIOMETRIC METHOD | General Metallic Materials & Product Standards |
| MSI-HRD-STD-147 | MS ISO 4545-1:2009 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD (FIRST REVISION) (ISO 4545-1:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-148 | MS ISO 4545-2:2009 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (FIRST REVISION) (ISO 4545-2:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-149 | MS ISO 4545-3:2009 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (FIRST REVISION) (ISO 4545-3:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-150 | MS ISO 4545-4:2009 | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 4: TABLE OF HARDNESS VALUES (ISO 4545-4:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-151 | MS ISO 4687-1:2004 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF PHOSPHORUS CONTENT - PART 1 : MOLYBDENUM BLUE SPECTROPHOTOMETRIC METHOD | Testing, Sampling & Analysis |
| MSI-HRD-STD-152 | MS ISO 4688-1:2011 | IRON ORES - DETERMINATION OF ALUMINIUM CONTENT - PART 1: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) (ISO 4688-1:2006, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-153 | MS ISO 4689:2004 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF SULFUR CONTENT - BARIUM SULFATE GRAVIMETRIC METHOD (ISO 4689:1986, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-154 | MS ISO 4689-3:2011 | IRON ORES - DETERMINATION OF SULFUR CONTENT - COMBUSTION/INFRARED METHOD (FIRST REVISION) (ISO 4689-3:2004, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-155 | MS ISO 4691:2011 (Confirmed:2025) | IRON ORES - DETERMINATION OF TITANIUM CONTENT - DIANTIPYRYLMETHANE SPECTROPHOTOMETRIC METHOD (FIRST REVISION) (ISO 4691:2009, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-156 | MS ISO 4701:2010 | IRON ORES AND DIRECT REDUCED IRON - DETERMINATION OF SIZE DISTRIBUTION BY SIEVING (FIRST REVISION) (ISO 4701:2008, IDT) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-157 | MS ISO 4948-1:2007 (CONFIRMED: 2021) | STEELS - CLASSIFICATION - PART 1: CLASSIFICATION OF STEELS INTO UNALLOYED AND ALLOY STEELS BASED ON CHEMICAL COMPOSITION (ISO 4948-1:1982, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-158 | MS ISO 4948-2:2007 (CONFIRMED: 2021) | STEELS - CLASSIFICATION - PART 2: CLASSIFICATION OF UNALLOYED AND ALLOY STEELS ACCORDING TO MAIN QUALITY CLASSES AND MAIN PROPERTY OR APPLICATION CHARACTERISTICS (ISO 4948-2:1981, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-159 | MS ISO 4960:2014 | COLD-REDUCED CARBON STEEL STRIP WITH A MASS FRACTION OF CARBON OVER 0.25 % (ISO 4960:2007, IDT) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-160 | MS ISO 4990:2005 | STEEL CASTINGS - GENERAL TECHNICAL DELIVERY REQUIREMENTS (ISO 4990:2003, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-161 | MS ISO 4997:2015 | COLD-REDUCED CARBON STEEL SHEET OF STRUCTURAL QUALITY (ISO 4997:2015, IDT) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-162 | MS ISO 5001:2014 (Confirmed:2025) | COLD-REDUCED CARBON STEEL SHEET FOR VITREOUS ENAMELLING (ISO 5001:2012, IDT) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-163 | MS ISO 5418-2:2011 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF COPPER - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) (ISO 5418-2:2006, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-164 | MS ISO 5446:2003 | FERROMANGANESE – SPECIFICATION AND CONDITIONS OF DELIVERY (ISO 5446:1980, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-165 | MS ISO 5922:2005 (CONFIRMED 2011) | MALLEABLE CAST IRON - SPECIFICATION (ISO 5922:2005, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-166 | MS ISO 6506-1:2017 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 1: TEST METHOD (FIRST REVISION) (ISO 6506-1:2014, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-167 | MS ISO 6506-2:2009 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-168 | MS ISO 6506-3:2017 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (THIRD REVISION) (ISO 6506-3:2014, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-169 | MS ISO 6506-4:2017 (Confirmed:2025) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 4: TABLE OF HARDNESS VALUES (FIRST REVISION) (ISO 6506-4:2014, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-170 | MS ISO 6507-1:2012 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD (FIRST REVISION) (ISO 6507-1:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-171 | MS ISO 6507-2:2012 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (FIRST REVISION) (ISO 6507-2:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-172 | MS ISO 6507-3:2012 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (FIRST REVISION) (ISO 6507-3:2005, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-173 | MS ISO 6507-4:2012 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES (ISO 6507-4:2005) | Testing, Sampling & Analysis |
| MSI-HRD-STD-174 | MS ISO 6508-2:2017 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (SECOND REVISION) (ISO 6508-2:2015, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-175 | MS ISO 6508-3:2017 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (SECOND REVISION) (ISO 6508-3:2015, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-176 | MS ISO 6830:2004 (CONFIRMED:2021) | IRON ORES - DETERMINATION OF ALUMINIUM CONTENT - EDTA TITRIMETRIC METHOD (ISO 6830:1986, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-177 | MS ISO 683-17:2010 | HEAT-TREATED STEELS, ALLOY STEELS AND FREE-CUTTING STEEL - BALL AND ROLLER BEARING STEELS (ISO 683-17:1999, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-178 | MS ISO 6892-2:2015 | METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE (FIRST REVISION) (ISO 6892-2:2011, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-179 | MS ISO 7438:2017 | METALLIC MATERIALS - BEND TEST (FIRST REVISION) (ISO 7438:2016, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-180 | MS ISO 7764:2011 (CONFIRMED: 2021) | IRON ORES - PREPARATION OF PREDRIED TEST SAMPLES FOR CHEMICAL ANALYSIS (FIRST REVISION) (ISO 7764:2006, IDT) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-181 | MS ISO 7834:2004 (CONFIRMED:2021) | IRON ORES - DETERMINATION OF ARSENIC CONTENT - MOLYBDENUM BLUE SPECTROMETRIC METHOD (ISO 7834:1987, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-182 | MS ISO 7900:2011 (Confirmed:2025) | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - ZINC- AND ZINC-ALLOY-COATED STEEL BARBED WIRE (ISO 7900:2006, IDT) | Wire, Rod & Wire Products |
| MSI-HRD-STD-183 | MS ISO 8062:2005 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES (ISO 8062:1994, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-184 | MS ISO 9202:2006 | JEWELLERY - FINENESS OF PRECIOUS METAL (ISO 9202:1991, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-185 | MS ISO 945-1:2012 | MICROSTRUCTURE OF CAST IRONS - PART 1: GRAPHITE CLASSIFICATION BY VISUAL ANALYSIS (FIRST REVISION) (ISO 945-1:2008, COR. 1:2010, IDT) | Cast Iron & Steel Castings |
| MSI-HRD-STD-186 | MS ISO 9455-1:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 1: DETERMINATION OF NON-VOLATILE MATTER, GRAVIMETRIC METHOD (ISO 9455-1:1990, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-187 | MS ISO 9455-10:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 10: FLUX EFFICACY TESTS, SOLDER SPREAD METHOD (ISO 9455-10:1998, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-188 | MS ISO 9455-11:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 11: SOLUBILITY OF FLUX RESIDUES (ISO 9455-11:1991, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-189 | MS ISO 9455-12:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 12: STEEL TUBE CORROSION TEST (ISO 9455-12:1992, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-190 | MS ISO 9455-13:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 13: DETERMINATION OF FLUX SPATTERING (ISO 9455-13:1996, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-191 | MS ISO 9455-14:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 14: ASSESMENT OF TACKINESS OF FLUX RESIDUES (ISO 9455-14:1991, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-192 | MS ISO 9455-15:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 15: COPPER CORROSION TEST (ISO 9455-15:1996, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-193 | MS ISO 9455-16:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 16: FLUX EFFICACY TESTS, WETTING BALANCE METHOD (ISO 9455-16:1988, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-194 | MS ISO 9455-2:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 2: DETERMINATION OF NON-VOLATILE MATTER, EBULLIOMETRIC METHOD (ISO 9455-2:1993, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-195 | MS ISO 9455-3:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 3: DETERMINATION OF ACID VALUE, POTENTIOMETRIC AND VISUAL TITRATION METHODS (ISO 9455-3:1992, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-196 | MS ISO 9455-5:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 5: COPPER MIRROR TEST (ISO 9455-5:1992, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-197 | MS ISO 9455-6:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 6: DETERMINATION AND DETECTION OF HALIDE (EXCLUDING FLUORIDE) CONTENT (ISO 9455-6:1995, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-198 | MS ISO 9455-8:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 8: DETERMINATION OF ZINC CONTENT (ISO 9455-8:1991, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-199 | MS ISO 9455-9:2009 | SOFT SOLDERING FLUXES - TEST METHODS - PART 9: DETERMINATION OF AMMONIA CONTENT (ISO 9455-9:1993, IDT) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-200 | MS ISO 9513:2015 (Confirmed:2025) | METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (FIRST REVISION) (ISO 9513:2012, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-201 | MS ISO 9516-1:2004 (CONFIRMED:2021) | IRON ORES - DETERMINATION OF VARIOUS ELEMENTS BY X-RAY FLUORESCENCE SPECTROMETRY - PART 1 : COMPREHENSIVE PROCEDURE (ISO 9516-1:2003, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-202 | MS ISO 9599:2005 | COPPER, LEAD AND ZINC SULFIDE CONCENTRATES - DETERMINATION OF HYGROSCOPIC MOISTURE IN THE ANALYSIS SAMPLE - GRAVIMETRIC METHOD (ISO 9599:1991, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-203 | MS ISO 9682-1:2011 (CONFIRMED: 2021) | IRON ORES - DETERMINATION OF MANGANESE CONTENT - PART 1:FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FIRST REVISION) (ISO 9682-1:2009, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-204 | MS ISO/TS 4949:2007 | STEEL NAMES BASED ON LETTER SYMBOLS (ISO/TS 4949:2003, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-205 | MS ISO 16120-3:2017 (Confirmed:2025) | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 3: SPECIFIC REQUIREMENTS FOR RIMMED AND RIMMED SUBSTITUTE, LOW CARBON STEEL WIRE ROD (SECOND REVISION) (ISO 16120-3:2011,IDT) | Wire, Rod & Wire Products |
| MSI-HRD-STD-206 | MS 2682:2017 | HOT ROLLED WIRE ROD FOR PRE-STRESSED STEEL - SPECIFICATION | Wire, Rod & Wire Products |
| MSI-HRD-STD-207 | MS 2040:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS AND COILED SHEETS - SPECIFICATION (FIRST REVISION) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-208 | MS ISO 6508-1:2017 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (SECOND REVISION) (ISO 6508-1:2016, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-209 | MS ISO 6892-1:2017 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (FIRST REVISION) (ISO 6892-1:2016, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-210 | MS EN 1396:2017 | ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS – SPECIFICATION | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-211 | MS 2025-1:2018 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS (FIRST REVISION) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-212 | MS 2025-2:2018 | COLD FORMED SHEET PILING OF NON ALLOY STEELS - PART 2: TOLERANCES ON SHAPE AND DIMENSIONS (FIRST REVISION) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-213 | MS ISO 6929:2018 (Confirmed:2025) | STEEL PRODUCTS - VOCABULARY (FIRST REVISION) (ISO 6929:2013, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-214 | MS ISO 7500-1:2018 (Confirmed:2025) | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (FIRST REVISION) (ISO 7500-1:2018, IDT) | Testing, Sampling & Analysis |
| MSI-HRD-STD-215 | MS 2317:2018 | STAINLESS STEEL - CHEMICAL COMPOSITION (FIRST REVISION) (ISO 15510:2014, MOD) | Stainless Steel |
| MSI-HRD-STD-216 | MS 2259:2018 | COLD FINISHED CARBON AND ALLOY STEEL BARS - SPECIFICATION | General Metallic Materials & Product Standards |
| MSI-HRD-STD-217 | MS 2705:2018 | Hot-rolled wire rods for pre-stressing steel bar concrete - Specification | Reinforcement & Construction Steel |
| MSI-HRD-STD-218 | MS 1138-4:2020 | Prestressing steel - Part 4: Strand (Second revision) | Reinforcement & Construction Steel |
| MSI-HRD-STD-219 | MS 2383:2020 | Prefinished flat steel products for interior/exterior building applications - Performance requirements (First revision) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-220 | MS 2500:2020 | Roffing and cladding products from metal sheet - Specification for self-supporting of steel sheet (First revision) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-221 | MS 2651:2020 | Cold-reduced carbon steel sheet and strip of commercial and drawing qualities (First revision) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-222 | MS ISO 16120-2:2020 | Non-alloy steel wire rod for conversion to wire - Part 2: Specific requirements for general purpose wire rod (Second revision) (ISO 16120-2:2017, MOD) | Wire, Rod & Wire Products |
| MSI-HRD-STD-223 | MS EN 10210-1:2017 (CONFIRM 2020) | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS | Structural Steel & Sections |
| MSI-HRD-STD-224 | MS EN 10210-2:2017 | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES | Structural Steel & Sections |
| MSI-HRD-STD-225 | MS EN 10219-1:2015 (CONFIRM 2020) | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS | Structural Steel & Sections |
| MSI-HRD-STD-226 | MS EN 10219-2:2015 | COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2 : TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES | Structural Steel & Sections |
| MSI-HRD-STD-227 | MS 2240-1:2020 | Stainless steels for general purposes - Part 1: Corrosion resistant flat produtcs (ISO 16143-1:2014, MOD) (First revision) | Stainless Steel |
| MSI-HRD-STD-228 | MS ISO/TS 4949:2016 | Steel names based on letter symbols (First revision) (ISO/TS 4949:2016, IDT) | General Metallic Materials & Product Standards |
| MSI-HRD-STD-229 | MS 1705:2023 | Hot-rolled carbon steel strip, sheet and plate of commercial and drawing qualities (First revision) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-230 | MS 1138-3:2023 | Prestressing steel - Part 3: Steel bars (Quenched and tempered) (First revision) | Reinforcement & Construction Steel |
| MSI-HRD-STD-231 | MS 1076:2023 | Tinplate and blackplate - Specification (Second revision) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-232 | MS 2240-2:2023 | Stainless steels for general purposes – Part 2: Corrosion-resistant semi-finished products, bars, rods and sections (First revision) (ISO 16143-2:2004, MOD) | Raw Materials & Semi-Finished Steel |
| MSI-HRD-STD-233 | MS 2657:2023 | Continuous hot-dip zinc alloyed with aluminium and magnesium coated steel sheet and strip (Second revision) | Non-Ferrous & Metallic Materials |
| MSI-HRD-STD-234 | MS 2660:2023 | Continuous hot-dip zinc coated and zinc-iron alloy-coated steel sheet and strip (First revision) | Flat Products, Sheet & Coated Steel |
| MSI-HRD-STD-235 | MS 1196:2023 | Continuous hot-dip aluminium/ zinc alloy-coated sheet of commercial, drawing and structural qualities (Fourth revision) | Non-Ferrous & Metallic Materials |
PART II - MSI DECARBONISATION ECOSYSTEM DEVELOPMENT
The Decarbonisation Ecosystem Development Programme expands the pool of professionals able to support Malaysia's iron and steel industry with training, consulting, verification and audit capability. The programme is designed for professionals from outside the traditional iron and steel workforce who can bring complementary expertise into the industry's low-carbon transition.
6. Programme Objectives
- To gain a comprehensive understanding of Malaysia's iron and steel industry, including its structure, challenges and opportunities.
- To understand the strategic direction of the Malaysia Steel Industry as outlined in the Steel Industry Roadmap 2035, including its sustainability and competitiveness goals.
- To support the transition of Malaysia's steel industry towards greater economic and environmental sustainability.
Ecosystem development objective establish 120 professionals from non-iron & steel backgrounds, including trainers, verifiers, consultants and auditors, to support decarbonisation initiatives.
7. Who Makes Up the Ecosystem?
| Ecosystem Role | Role in the MSI Ecosystem |
|---|---|
| Training Provider | Manage and coordinate trainers for effective delivery and programme alignment; process trainer payments after execution; support promotion of training dates and schedules to maximise awareness and participation. |
| Trainer | Attend mandatory Iron & Steel 101; deliver training effectively as requested by the industry; ensure learning objectives are met; evaluate training effectiveness through feedback and refine content/delivery. |
| Consultant | Attend mandatory Iron & Steel 101; able to perform consulting roles within their organisations after completing Level 2 of any MSI course module; may deliver training if appropriately qualified. |
| Verifier | Attend mandatory Iron & Steel 101; participate in the multidisciplinary professional-practitioner ecosystem with role/qualification recorded separately. |
| Auditor | Attend mandatory Iron & Steel 101; participate in the multidisciplinary professional-practitioner ecosystem with role/qualification recorded separately. |
8. Two Flexible Recognition Pathways
MSI provides two pathways for professionals and training providers to participate in the ecosystem: use an approved own course/module under MSI recognition, or progress through MSI-developed course modules.
Pathway 1 - Use Your Own Course & Module
| Stage | Website Detail |
|---|---|
| Iron & Steel 101 (mandatory) | 1-day course; RM500; certificate issued after completion. |
| MSI Registration | Trainer/Consultant/Verifier/Auditor RM1,000; Training Provider RM3,000. |
| Recognition | Successful registrants are recognised under MSI and may train steel industry players using own modules where applicable. |
| Execution | Training/consulting executed under MSI recognition and programme/evidence controls. |
| Trainer-TP linkage | MSI liaises only with a TP for trainer payments; each trainer must be linked to a registered TP; MSI may assign an unlinked trainer to a registered TP. |
| Consultant/Verifier/Auditor linkage | No TP linkage required unless acting as a trainer. |
Pathway 2 - Use MSI Course & Module
| Stage | Website Detail |
|---|---|
| Iron & Steel 101 (mandatory) | 1-day course; RM500; certificate issued after completion. |
| MSI Registration | Trainer/Consultant/Verifier/Auditor RM1,000; Training Provider RM3,000. |
| Execution | Successful registrants are recognised under MSI and enter the execution pathway. |
| MSI Course Modules (optional) | Participants may choose ESG Professionals; Carbon Tax Professionals; Green Financing & Green Procurement Professionals; and/or CBAM & EPD Professionals. |
| Qualification outcome | Participants may deliver MSI course modules and provide consulting services subject to the certification-level rules below. |
| Trainer-TP linkage | Trainers must be linked to a registered TP for MSI trainer payment arrangements. |
| Consultant/Verifier/Auditor linkage | No TP linkage required unless acting as a trainer. |
9. Iron & Steel 101 - Mandatory Foundation Programme
Iron & Steel 101 provides the common industry foundation for ecosystem participants, helping professionals understand the steel value chain, industry economics, policy and regulatory context, and the decarbonisation transition.
| Programme Item | Detail |
|---|---|
| Title | Iron & Steel 101 Training Programme |
| Status | Mandatory foundational course |
| Duration | 1 day |
| Delivery Mode | Physical / On-site |
| Fee | RM500 per participant |
| Certificate | Issued after completion |
One-Day Programme Outline
| Time | Module / Session | Topics |
|---|---|---|
| 08:00-08:30 | Registration | Registration |
| 08:30-09:00 | Opening and Introduction | Opening and introduction |
| 09:00-10:30 | Module 1: Iron and Steel Fundamentals (1.30 hr) | Unit 1.1 Introduction and History of Iron and Steel; 1.2 Steel Supply Chain Overview; 1.3 Production Route on Ironmaking and Steelmaking; 1.4 Steelmaking Operations and Maintenance; 1.5 Raw Materials for Steelmaking; 1.6 Steel Products and Quality; Module 1 Quiz. |
| 10:30-11:00 | Morning Break | Morning break |
| 11:00-12:30 | Module 2: The Economy of Iron and Steel (1.30 hr) | Unit 2.1 Global Iron & Steel Economy; 2.2 Iron & Steel Economy in Southeast Asia; 2.3 Economics of the Malaysian Iron & Steel Industry; 2.4 Issues & Challenges in the Iron & Steel Industry; 2.5 Strategic Direction of the Iron & Steel Industry; Module 2 Quiz. |
| 12:30-14:00 | Lunch Break | Lunch break |
| 14:00-15:30 | Module 3: Policy & Regulatory Landscape (1.30 hr) | Unit 3.1 Government Policies on Iron and Steel Industry; 3.2 Regulations on Iron and Steel Industry; 3.3 Governing Bodies and Initiatives on Iron and Steel Industry; Module 3 Quiz. |
| 15:30-16:00 | Tea Break | Tea break |
| 16:00-17:30 | Module 4: Decarbonization of the Iron & Steel Industry (1.30 hr) | Unit 4.1 Overview on Iron and Steel Industry Decarbonization; 4.2 Carbon Tax, EPD and CBAM; 4.3 Green Steel; 4.4 Technology for Decarbonization; 4.5 ESG, Green Financing and Green Procurement; Module 4 Quiz. |
| 17:30-18:00 | Q&A, Closing, Session End | Q&A, closing and session end |
10. Professional Certification Tracks
Participants may choose one or more certification tracks. Each track follows three progressive levels, while Iron & Steel 101 remains the mandatory foundation.
| Track | Level 1 - Fundamentals | Level 2 - Capacity Building | Level 3 - Train-the-Trainer |
|---|---|---|---|
| ESG Professionals | RM1,000 | RM1,500 | RM2,000 |
| Carbon Tax Professionals | RM1,000 | RM1,500 | RM2,000 |
| Green Financing & Green Procurement Professionals | RM1,000 | RM1,500 | RM2,000 |
| CBAM & EPD Professionals | RM1,000 | RM1,500 | RM2,000 |
- Level 1 introduces core concepts, frameworks and principles.
- Level 2 builds capacity for professionals who intend to perform consulting roles within their organisations.
- Level 3 is Train-the-Trainer and prepares participants to deliver MSI course modules.
- A certificate is issued for each level completed.
- Trainers/consultants wishing to deliver MSI modules on behalf of MSI must complete all three levels.
11. Iron & Steel ESG & Governance Course Menu
| No. | Course Item |
|---|---|
| 1 | Integrity - Anti-Corruption & Bribery |
| 2 | Basic ESG for Non-Professionals |
| 3 | Diversity & Human Resource |
| 4 | Change Management |
| 5 | Mental Health & OSH |
| 6 | Energy Management |
| 7 | Introduction to Iron & Steelmaking |
| 8 | Labour Practice Standards |
| 9 | Supply Chain Management |
| 10 | Data Privacy & Security |
| 11 | Water Management |
| 12 | Waste Management |
| 13 | Emission Management |
| 14 | Certificate of Origin (NPCO) |
| 15 | Government Policy - Iron & Steel Policy, Regulation, Anti-Dumping, AFTA |
12. Registration and Participation Fees
| Item | Fee / Requirement |
|---|---|
| Iron & Steel 101 | RM500 per participant |
| Trainer / Consultant / Verifier / Auditor registration | RM1,000 |
| Training Provider registration | RM3,000 |
| Annual licence renewal | RM100 per year |
| Minimum annual CPD | 10 points |
13. Annual CPD and Professional Maintenance
Registered trainers maintain active eligibility through annual licence renewal and continuing professional development.
| Eligible Activity | CPD Points |
|---|---|
| Attend MSI Events (e.g., forums, webinars) | 1 point |
| Conduct a Training Session under MSI | 1 point |
| Contribute an Article to MSI Publication | 1 point |
| Complete a Consultation Project under MSI | 2 points |
| Participate in MSI Research | 2 points |
14. Working with Training Providers and Trainers
MSI's ecosystem is structured so that Training Providers coordinate programme delivery and trainers, while MSI owns the recognition and programme framework. For trainer payment arrangements, trainers are linked to a registered Training Provider. Consultants, verifiers and auditors do not require a Training Provider linkage unless they are also acting as trainers.
Illustrative Programme Delivery Model
| Stakeholder | Role |
|---|---|
| MSI | Programme owner, certification, module development, industry recognition |
| Training Provider | Programme coordination, marketing, logistics, participant management |
| Trainer | Deliver training, provide expertise and incorporate own/specialised content if any |
15. Why Join the MSI Decarbonisation Ecosystem?
- 1. Growing Mandatory ESG & EPD Training Demand: Emerging carbon tax/sustainability requirements are expected to increase ESG and EPD training needs.
- 2. Early Impact of Carbon Tax: Steel is expected to be among early sectors affected; registered trainers can build relevant capability.
- 3. No Existing Carbon Tax Certification: Programme material identifies a gap in certified programmes specifically focused on carbon tax.
- 4. Future Consulting Opportunities: A roster of registered professionals supports emerging consulting opportunities.
- 5. Strategic Partnership for Funding: MSI is collaborating with HRD Corp to utilise levy funds for the steel industry.
- 6. Bridging Loans to TPs & Trainers: Programme concept includes bridging financing support to reduce upfront funding burden.
- 7. High Return on Investment & Levy Utilisation: Programme material references roughly RM10 million of HRD Corp levy contributions and potential benefit from claimable programmes.
- 8. Limited Registration Window: Programme material notes future application windows/slots may be limited.
Build Capability with MSI
Organisations can engage MSI to identify suitable training programmes, develop customised learning pathways, participate in technical and ESG training, or join the trainer, Training Provider and professional ecosystem supporting the iron and steel industry's productivity and decarbonisation transition.
- Enquire about upcoming public training programmes.
- Request an in-house or customised programme for your organisation.
- Register interest as a trainer, consultant, verifier, auditor or Training Provider.
- Discuss collaboration on technical, ESG, energy, standards or decarbonisation capability development.
Website Administration Notes
This section is for MSI website administrators/content owners and is not intended to appear on the public webpage.- Before publication, confirm which of the 149 programme records are currently open for enrolment and which are available only on request.
- Retain the 'Development pipeline' label for candidate programmes until MSI formally launches the programme or confirms a delivery partner.
- The 235 NSC16 standards modules should be presented as a development pipeline, not as currently available courses, until course design is completed.
- Confirm registration fees, certification fees, annual renewal fee, CPD rules and commercial arrangements before publishing or accepting payment.
- Use one canonical programme title/code on the website to avoid duplicate pages for virtual/physical/date/provider variants.
- Where provider/collaborator names are published, verify that MSI is authorised and that the relationship remains current.
Enquiries